Highly Efficient Selective Hydrogenation of Cinnamaldehyde to Cinnamyl Alcohol over CoRe/TiO2 Catalyst.

Allylic alcohols typically produced through selective hydrogenation of α,ß-unsaturated aldehydes are important intermediates in fine chemical industry, but it is still a challenge to achieve its high selectivity transformation. Herein, we report a series of TiO2-supported CoRe bimetallic catalysts for the selective hydrogenation of cinnamaldehyde (CAL) to cinnamyl alcohol (COL) using formic acid (FA) as a hydrogen donor. The resultant catalyst with the optimized Co/Re ratio of 1:1 can achieve an exceptional COL selectivity of 89% with a CAL conversion of 99% under mild conditions of 140 °C for 4 h, and the catalyst can be reused four times without loss of activity. Meanwhile, the Co1Re1/TiO2/FA system was efficient for the selective hydrogenation of various α,ß-unsaturated aldehydes to the corresponding α,ß-unsaturated alcohols. The presence of ReOx on the Co1Re1/TiO2 catalyst surface was advantageous to the adsorption of C=O, and the ultrafine Co nanoparticles provided abundant hydrogenation active sites for the selective hydrogenation. Moreover, FA as a hydrogen donor improved the selectivity to α,ß-unsaturated alcohols.

Reductive Amination of 5-Hydroxymethylfurfural to 2,5-Bis(aminomethyl)furan over Alumina-Supported Ni-Based Catalytic Systems.

Mono- and bimetallic Ni-based catalysts were prepared by screening 6 supports and 14 secondary metals for reductive amination of 5-hydroxymethylfurfural (5-HMF) into 2,5-bis(aminomethyl)furan (BAMF), among which γ-Al2 O3 and Mn were the best candidates. By further optimization of the reaction conditions at 0.4 g catalyst loading for 0.5 g substrate of 5-HMF and 160 °C of reaction temperature, 10Ni/γ-Al2 O3 and 10NiMn(4 : 1)/γ-Al2 O3 achieved the highest BAMF yields of 86.3 and 82.1 %, respectively. Although the BAMF yield values were comparable with that over Raney Ni, the turnover frequencies based on the initial BAMF yield and unit weight of Ni for 10NiMn(4 : 1)/γ-Al2 O3 , 10Ni/γ-Al2 O3 , and Raney Ni were calculated as 0.41, 0.09, and 0.04 h-1 , respectively. X-ray diffraction, transmission electron microscopy, and X-ray photoelectron spectroscopy showed that the existence of MnOx well dispersed on the γ-Al2 O3 support and its electron transfer effect with Ni particles on the surface of the support contributed to the high efficiency and better recyclability for the five-time reused 10NiMn(4 : 1)/γ-Al2 O3 catalyst.

One-Step Reductive Amination of 5-Hydroxymethylfurfural into 2,5-Bis(aminomethyl)furan over Raney Ni.

Simultaneous reductive amination of C=O and C-OH in 5-hydroxymethylfurfural (HMF) into C-NH2 in 2,5-bis(aminomethyl)furan (BAMF) is challenging. In this work, reductive amination of C=O in HMF was firstly studied, in which HMF can be converted into 5-hydroxymethyl furfurylamine (HMFA) with a 99.5 % yield over Raney Co catalyst. BAMF was then directly synthesized with 82.3 % yield from HMF over Raney Ni catalyst at 160 °C for 12 h. An even higher yield of 88.3 % could be obtained through a stepwise reductive amination process, in which the reaction started at 120 °C for the first 2 h over Raney Co mainly for amination of C=O and then continued at 160 °C for another 10 h over Raney Ni mainly for amination of C-OH. Under optimized reaction conditions, the catalyst could be reused four times without obvious loss in catalytic performance. XRD and XPS characterization of the reused catalyst indicated that the formation of Ni3 N and the adsorption of alkyl amines could be the main reasons for the deactivation of the catalyst. Moreover, plausible reaction pathways were proposed to originate the detected by-products according to the kinetic profiles.

New insights into external layers of cyanobacteria and microalgae based on multiscale analysis of AFM force-distance curves.

External layers, the outermost structures around cells, perform essential eco-physiological functions to support cyanobacteria and microalgae in aquatic environments. These layers have been recognized as adaptations to turbulence, a ubiquitous and inherent physical process occurring in the environments of most cyanobacteria and microalgae. However, the underlying biophysical mechanism of these layers is still poorly understood. Force measurements were performed directly on the external layers of eight living cyanobacterial and green algal strains in situ using atomic force microscopy (AFM). We developed a wavelet analysis method based on a multiscale decomposition of derivative force-distance curves to quantify the elastic responses of various external layers upon mechanical deformation. Such analysis has the advantages of detecting singularities and distinguishing the biomechanical contributions of each external layer. The elastic modulus of the same type of external layer follows the same statistical distribution. However, the elastic response among different types of external layers is challenged by our method, indicating the heterogeneity of the mechanical properties of inner and outer layers in multilayer strains. This discrepancy was due to the thickness and texture of each external layer, especially the chemical presence of ribose, hydroxyproline and glutamic acid. This study highlights a new way to elucidate more precise information about external layers and provides a biophysical mechanistic explanation for the functioning of the various external layers to protect cyanobacterial and microalgal cells in a turbulent environment.

The Role of Cyanobacterial External Layers in Mass Transfer: Evidence from Temperature Shock Experiments by Noninvasive Microtest Technology.

Groundwork on cyanobacterial external layers is crucial for an improved understanding of the persistent dominance of cyanobacteria in freshwaters. In this study, the role of two morphotypes of external layers in Microcystis and Nostoc in mass transfer and instantaneous temperature shock were explored by noninvasive microtest technology (NMT) after a series of pretreatments, to obtain the external layers retained or stripped samples. The results showed no statistical influence on photosynthetic activity between retained and stripped samples in both Microcystis and Nostoc. External-layer-retaining strains had higher net O2 effluxes than stripped strains. Moreover, the net NH4+ influx was significantly higher for the sheath retaining Nostoc than for the stripped sample, indicating that external layers might be an important feature driving mass transfer in cyanobacteria. However, the role of slime in NH4+ absorption was limited compared with that of sheath. In addition, external-layer-retaining strains exhibited a longer response time to instantaneous temperature shock, greater net O2 effluxes at a 4 °C shock and lower net O2 influx at a 35 °C shock, which were interpreted as reflecting a tolerance to temperature fluctuation over short time scales via a buffer function of external layers to stabilize cell activity, ameliorating the efficiency of photosynthesis and respiration. These results advance current knowledge regarding the external layers, especially the dense sheath, involved in the mass transfer in cyanobacteria, and provide new clues concerning the adaptive strategies of cyanobacteria under global climate changes.

The polyubiquitin gene MrUBI4 is required for conidiation, conidial germination, and stress tolerance in the filamentous fungus Metarhizium robertsii.

The polyubiquitin gene is a highly conserved open reading frame that encodes different numbers of tandem ubiquitin repeats from different species, which play important roles in different biological processes. Metarhizium robertsii is a fungal entomopathogen that is widely applied in the biological control of pest insects. However, it is unclear whether the polyubiquitin gene is required for fungal development, stress tolerance, and virulence in the entomopathogenic fungus. In the present study, the polyubiquitin gene (MrUBI4, MAA_02160) was functionally characterized via gene deletion in M. robertsii.Compared to the control strains, the MrUBI4 deletion mutant showed delayed conidial germination and significantly decreased conidial yields (39% of the wild-type 14 days post-incubation). Correspondingly, the transcript levels of several genes from the central regulatory pathways associated with conidiation, including brlA, abaA, and wetA, were significantly downregulated, which indicated that MrUBI4 played an important role in asexual sporulation. Deletion of MrUBI4 especially resulted in increased sensitivity to ultraviolet (UV) and heat-shock stress based on conidial germination analysis between mutant and control strains. The significant increase in sensitivity to heat-shock was accompanied with reduced transcript levels of genes related to heat-shock protein (hsp), trehalose, and mannitol accumulation (tps, tpp, nth, and mpd) in the MrUBI4 deletion mutant. Deletion of MrUBI4 has no effect on fungal virulence. Altogether, MrUBI4 is involved in the regulation of conidiation, conidial germination, UV stress, and heat-shock response in M. robertsii.